Fujifilm: FinePix XP80 Firmware Update Ver.1.01 (Jun. 29, 2015): Two Improvements

photoxels

9 years ago

Fujifilm FinePix XP80 rugged digital camera

The following video presents Fuji Guys – FinePix XP80 – First Look:

FIRMWARE UPDATE

Jun. 29, 2015

FinePix XP80 Firmware Update Ver.1.01

Please read the followings and update the firmware.

Notes

· Please read this update after refreshing this page.
- * In case of Internet Explorer and Google Chrome, hold down the control key and press the F5 key.
- * In case of Safari, hold down the control key and press “R” key.
· The firmware upgrade is not required if its version is 1.01.
- * Refer to “2) Firmware version checking procedure” in the “Detail of firmware update steps” below to check the firmwawre version.
- Detail of firmware update steps

The firmware update Ver. 1.01 from Ver. 1.00 incorporates the following issues:

1.The phenomenon is fixed that the shooting button doesn’t work on a smartphone with “Camera Remote” application software during the SILENT mode.
2.The live view will appear on a smartphone with “Camera Remote” application software during self-timer countdown.

Please refer to the steps below about necessities and steps for firmware update.

1.If firmware updating fails, the camera may no longer operate correctly in some cases. Carefully read the notes provided here.
2.Always use the fully-charged battery when updating the firmware as a basic manner. Never turn the camera off or attempt to use any of the camera controls while the firmware is being overwritten.
3.Firmware updating requires approximately 90 seconds.
4.Once the firmware has been updated, some data of the previous version cannot be restored.
5.Please check here if you encounter any problems.
- Error messages and responses