Firmware Updates • Nikon

Nikon D4S Camera Firmware Update (2016-06-08): “C” Firmware Version 1.31

2016-06-30
by photoxels
2 min read
Nikon D4S
Nikon D4S

The following video presents A Journey to Perfection: The New Nikon D4S:

Follow Nikon Professional photographer Scott Woodward as he heads to Bhutan to test the Nikon D4S’s all-weather build, high ISO and high-speed continuous shooting functions. Discover the Nikon D4S’ full performance potential to deliver images and videos with uncompromising quality.

Nikon D4S

Nikon D4S

The Nikon software update service supplies software that can be used to update the Nikon D4S camera “C” firmware to version 1.31.

  • Before proceeding, select Firmware version in the camera SETUP MENU and check the camera firmware version.
  • You will not need to download or install this update if the firmware listed above is already installed.

IMPORTANT: Firmware updates cannot be performed if Enable is currently selected for Network > Network connection in the SETUP MENU. Select Disable for Network connection before proceeding.

Changes from “C” Firmware Version 1.30 to 1.31

  • Fixed an issue that occurred with WR-R10 wireless remote controller firmware version 3.00.
  • In rare cases, the camera would fail to display the number of exposures remaining or would take about a minute to power down when the WR-R10 was connected.

For other important info as well as to download the new firmware, please visit http://downloadcenter.nikonimglib.com/en/download/fw/185.html .

You can buy the Nikon D4S and accessories at B&H (prices are in USD):

You may also like