FUJIFILM North America Corporation has officially announced the launch of the X-Pro3, the latest digital rangefinder from the X Series range of APS-C mirrorless cameras. The X-Pro3 has a particular audience in mind: those who like to keep “in the moment” — and attempts to combine “all the feeling of film with all the ease and quality of digital.” It has also one of the most durable camera bodies in FUJIFILM camera history, thanks to the exterior use of titanium top and base plates.
Fujifilm X-Pro3, Black: Hidden Tilting Touchscreen with the 1.28 inch Color Memory LCD Monitor which is set in the standard mode as shown above
Fujifilm X-Pro3 (DR Black): Hidden Touchscreen opens
Not satisfied with a distinctly retro camera with dedicated control dials and hybrid optical/electronic viewfinder, the Fujifilm X-Pro3 takes nostalgia one step further down the retro path with the introduction of an always-on rear 1.28-inch color Memory LCD on the back part of the LCD (which is turned inward in its default “closed” position). This square LCD displays shooting settings even when the camera is turned off. The “Classic” mode setting displays the Film Simulation, white balance and other settings reminiscent of film cameras where the photographer would tear off the top cover of a film box and slide it into the back slot on the back of the camera to remind himself of the type of film he was using in the camera. The “Standard” mode displays shutter speed, ISO sensitivity, the number of remaining frames, and other shooting settings in plain numbers and icons — similar to the top LCD on many pro-level cameras.
Fujifilm X-Pro3
Fujifilm X-Pro3, Black: Hidden Tilting Touchscreen: Image Courtesy of Fujifilm
Fujifilm X-Pro3 (DR Black): 180-Degree Tilting Touchscreen
As mentioned, the LCD is unusual in that it is turned inward in its default “closed” position to “keep photographers looking through the viewfinder.” Apparently Fujifilm wants photographers to enjoy shooting through the viewfinder, and to that effect it has improved both the optical viewfinder (clearer, less distortion, larger angle of view) and the EVF (higher resolution and contrast, wider color space, brighter, higher frame rate) on the X-Pro3. However, if you do insist in actually using the LCD, you can tilt it almost 180° downward to reveal a 1.62M-dot Tilt Touch display. This allows you to shoot from the waist or at ground level. I’m not sure how easy it will be use the LCD to shoot above your head, unless you awkwardly hold the camera upside down.
Fujifilm X-Pro3: OVF/EVF Combination, a hybrid viewfinder: Image Courtesy of Fujifilm
Fujifilm X-Pro3: © Stefan Finger shoots journalistic wedding photography
A new “Classic Negative” Film Simulation is also available, which emulates the classic Fujicolor Superia negative film that was normally used back then in the film days for everyday snapshots.
Fujifilm X-Pro3: “Classic Negative” Film Simulation: Image Courtesy of Fujifilm
It is great to see Fujifilm giving the X-Pro Series its own distinct personality. It is the small and unique features only available on the X-Pro3 that will tug at your heartstring. The X-Pro3 features a weather-resistant body, fast and precise AF, beautiful color capture, low noise high ISO capability, and the ability to lock focus at close to absolute darkness (-6EV).
Fujifilm X-Pro3 Low-light Shooting: AF system operates down to -6EV: © Tomasz Lazar
Fujifilm is sticking to an update cycle for its X-Pro Series digital rangefinder mirrorless camera of about every four years. The X-Pro1 was released in February 2012, the X-Pro2 in March 2016, and today the X-Pro3 is announced to be released late Fall 2019. US and Canadian prices are in the press release below.
Fujifilm X-Pro3 Low-light Shooting: © Patrick La Roque (Canada); XF18mmF2 R | F2.0 | 1/200sec. | ISO 160
The following video presents Introducing the FUJIFILM X-Pro3:
“It’s here! We’re so excited to introduce the X-Pro3. Created with street photographers and photojournalists in mind, the features of the X-Pro3 are all designed to keep the photographer focused on its subject. X-Pro3’s revolutionary hybrid OVF/EVF and hidden LCD touchscreen keeps the photographer in the moment, while the state-of-the-art imaging sensor, high-quality 4k video, and unparalleled color reproduction & film simulation modes ensure spectacular results. X-Pro3 is a true photographer’s tool that combines all the feeling of film with all the ease and quality of digital.“
PRESS RELEASE
Fujifilm X-Pro3 (DR Silver)
FUJIFILM INTRODUCES THE X-PRO3 – A RETURN TO THE CRAFT AND HEART OF PHOTOGRAPHY
Fujifilm X-Pro3: © Stefan Finger
Valhalla, New York, October 23, 2019 – FUJIFILM North America Corporation is pleased to announce the launch of the FUJIFILM X-Pro3, the latest rangefinder from the X Series range of mirrorless digital cameras, and perfect for photographers on the move who want top-level features, a low profile, and reliable durability.
Fujifilm X-Pro3: © Suzanne Stein “uses X-Pro3 to paint a genuine picture of life on the streets of New York City”
Created with street photographers and photojournalists in mind, the features of the X-Pro3 are designed to keep the photographer focused on the subject. Its revolutionary hybrid OVF/EVF and hidden LCD touchscreen keeps the photographer in the moment, while its state-of-the-art imaging sensor and high-quality 4k video ensure spectacular results. X-Pro3 is a true photographer’s tool that combines all the feeling of film with all the ease and quality of digital. The X-Pro3 is one of the most durable camera bodies in FUJIFILM camera history, thanks to the exterior use of titanium, known for its outstanding strength-to-weight ratio.
Fujifilm X-Pro3 Low-light Shooting: © Mario Cruz (Portugal)| XF23mmF1.4 R | F1.4 | 1/1000sec. | ISO 1600
Two color variations will be available with additional DuratectTM*1 (DR) surface- hardening technology for extra toughness and premium finish. The X-Pro3 uses the back illuminated 26.1MP X-TRANS CMOS 4 sensor and the X-Processor 4 image processing engine, first seen in the FUJIFILM X-T3 and then the FUJIFILM X-T30. Using this combination and new firmware, the phase-detection AF now works down to a luminance of -6EV; close to absolute darkness. Also new is CLASSIC Neg. Film Simulation mode, which is designed to simulate color negative film that was normally used for everyday snapshots.
Fujifilm X-Pro3: © Jonas Rask (Denmark) | XF23mmF2 R WR | F5.6 | 1/1500sec. | ISO 800
Fujifilm X-Pro3 (DR Black)
More information about X-Pro3:
New OVF/EVF Combination: Great photography is all about freezing natural moments in time and X-Pro3’s impressive hybrid viewfinder ensures you are always fully immersed in that moment, without influencing it. The optical viewfinder (OVF) uses a 0.5x magnification and parallax-correcting frame lines to provide an uninterrupted and true-to-life view of what’s in front of you. It also allows you to see outside the frame so that you are always ready to catch the approaching action. Additionally, the 3.69M-dot OLED electronic viewfinder (EVF) offers a fast and high-quality representation of exactly how your image will look, with a 1:5000 contrast ratio for excellent clarity. When combined, this industry-leading technology provides an outstanding picture, helping to capture the world exactly as it is being seen.
Fujifilm X-Pro3: © Stefan Finger
Hidden 180-Degree Tilt and Touchscreen: Every aspect of X-Pro3 has been designed for photographers who like to live in the moment, but none more so than its hidden 1.62M-dot, tilting LCD touchscreen. When the LCD is closed, all that can be viewed is a mini-display showing essential settings, removing the distraction of a full screen while shooting. With your mind and your eye always on the scene in front of you rather than the scene you’ve just shot, you can find a connection not just with your subject, but also with your art. If seeking the perfect moment is instinctive to you, then look no further than X-Pro3 as your tool.
Fujifilm X-Pro3: © Matias Costa (Spain) | XF23mmF2 R WR | F10 | 1/350sec. | ISO 160
Incredible Sensor, Processor, and AF Performance: Lying at the heart of X-Pro3 is its state-of-the-art X-Trans CMOS 4 sensor and X-Processor 4 combination. This exceptional 26.1MP sensor uses a back-illuminated design to maximize quality and dynamic range, while its unique color filter array controls moiré and false color without the need for an optical, low-pass filter. Such outstanding imaging capability is complemented by the quad-core X-Processor 4. This powerful CPU not only ensures images are quickly and smoothly processed, but thanks to Fujifilm’s new algorithm, boosts AF performance with precision face and eye detection right down to -6EV.
Fujifilm X-Pro3 Low-light Shooting: © Jonas Rask “takes X-Pro3 with him on to the streets of Spain’s capital city to explore the concept of legacy and heritage”
Enhanced Body Design: X-Pro3’s timeless body design features a top and base plate constructed from titanium, which, despite being little more than half the density of stainless steel, is seven times more durable. In addition to classic black, the weather-sealed X-Pro3 is also available in DR Silver and DR Black, which utilize cold plasma technology for a scratch-resistant finish. This outstanding durability combines with a newly developed shutter release unit that ensures dependable precision and smoother, more responsive functionality to create a camera that can be relied upon to perform in nearly any situation.
Unparalleled Color Reproduction and Film Simulation Modes: Fujifilm’s legacy in color science has given it legendary status among image-makers across the world. During its 85 years in the industry, Fujifilm has been responsible for some of the most iconic photographic films in history. The exceptional knowledge gained has been poured into Fujifilm’s collection of 16 digital Film Simulation modes. This cutting-edge technology allows photographers to achieve stunning results straight out of camera and X-Pro3 introduces two exciting new additions to the Film Simulation mode collection: CLASSIC Neg. and MONOCHROMATIC Color.
Fujifilm X-Pro3: © Yukio Uchida: Monochromatic Colour “allows you to choose a key colour from a matrix of Warm / Cool tones and Magenta / Green hues. You can incorporate the rich gradation into your images to create photographs with a personal twist”
The X-Series’ first interchangeable lens camera, FUJIFILM X-Pro1, was released in February 2012, and its successor, FUJIFILM X-Pro2, debuted in March 2016 with vastly improved image quality and performance. The X-Pro Series has been embraced by many professional and enthusiast photographers who enjoy the classic rangefinder style, portability, and dials that enable intuitive operation. The X-Pro3 builds on the series’ legacy as the ultimate solution for photographers on the move who know the value of being in the moment.
Fujifilm X-Pro3 (Classic Black) with optional Case
The X-Pro3 camera will be offered with manufacturer’s suggested retail prices as follows:
$1,799.95 USD Black
$1,999.95 USD DR Black or DR Silver
$2,399.99 CAD Black
$2,699.99 CAD DR Black or DR Silver.
Fujifilm X-Pro3 (DR Silver)
X-Pro3 is expected to go on sale in late Fall 2019. For more information, please visit https://fujifilm-x.com/en-us/x-pro3.
*1 Duratect is a trademark or registered trademark of Citizen Watch Co., Ltd.
About FUJIFILM North America Corporation, Electronic Imaging
For more information, please visit www.fujifilmusa.com/northamerica, go to https://twitter.com/FujifilmX_US to follow Fujifilm on Twitter, go to https://www.instagram.com/fujifilmx_us/ to follow Fujifilm on Instagram, or go to https://www.facebook.com/FujifilmXUS/ to Like Fujifilm on Facebook. To receive news and information direct from Fujifilm via RSS, subscribe at www.fujifilmusa.com/rss.
About Fujifilm
FUJIFILM North America Corporation, a marketing subsidiary of FUJIFILM Holdings America Corporation, consists of five operating divisions and one subsidiary company. The Imaging Division provides consumer and commercial photographic products and services, including: photographic paper; digital printing equipment, along with service and support; personalized photo products; film; and one-time-use cameras; and also markets motion picture archival film and on-set color management solutions to the motion picture, broadcast and production industries. The Electronic Imaging Division markets consumer digital cameras, and the Graphic Systems Division supplies products and services to the graphic printing industry. The Optical Devices Division provides optical lenses for the broadcast, cinematography, closed circuit television, videography and industrial markets, and also markets binoculars. The Industrial and Corporate New Business Development Division delivers new products derived from Fujifilm technologies. FUJIFILM Canada Inc. sells and markets a range of FUJIFILM products and services in Canada. For more information, please visit www.fujifilmusa.com/northamerica, go to www.twitter.com/fujifilmus to follow Fujifilm on Twitter, or go to www.facebook.com/FujifilmNorthAmerica to Like Fujifilm on Facebook. To receive news and information direct from Fujifilm via RSS, subscribe at www.fujifilmusa.com/rss.
FUJIFILM Holdings Corporation, Tokyo, Japan, brings cutting edge solutions to a broad range of global industries by leveraging its depth of knowledge and fundamental technologies developed in its relentless pursuit of innovation. Its proprietary core technologies contribute to the various fields including healthcare, graphic systems, highly functional materials, optical devices, digital imaging and document products. These products and services are based on its extensive portfolio of chemical, mechanical, optical, electronic and imaging technologies. For the year ended March 31, 2019, the company had global revenues of $22 billion, at an exchange rate of 111 yen to the dollar. Fujifilm is committed to responsible environmental stewardship and good corporate citizenship. For more information, please visit: www.fujifilmholdings.com.
Specifications
| Model name | FUJIFILM X-Pro3 | |
| Number of effective pixels | 26.1 millions pixels | |
| Image sensor | 23.5mm×15.6mm (APS-C) X-Trans CMOS 4 with primary color filter. | |
| Sensor Cleaning system | Ultra Sonic Vibration | |
| Storage media | SD memory card (~2GB) / SDHC memory card (~32GB) / SDXC memory card (~512GB) | |
| UHS-I / UHS-II / Video Speed Class V30 *1 | ||
| File format of still image | JPEG: Exif Ver.2.3*2, RAW: 14bit RAW (RAF original format) / RAW+JPEG | |
| Number of recorded pixels | [L]<3:2> 6240 × 4160 <16:9> 6240 × 3512 <1:1> 4160 × 4160 | |
| [M]<3:2> 4416 × 2944 <16:9> 4416 × 2488 <1:1> 2944 × 2944 | ||
| [S]<3:2> 3120 × 2080 <16:9> 3120 × 1760 <1:1> 2080 × 2080 | ||
| Lens mount | FUJIFILM X mount | |
| Sensitivity | Standard output | AUTO1 / AUTO2 / AUTO3 / ISO160~12800 (1/3 step) |
| Extended output | ISO80 / 100 / 125 / 25600 / 51200 | |
| Exposure control | TTL 256-zone metering, Multi / Spot / Average / Center Weighted | |
| Exposure mode | P (Program AE) / A (Aperture Priority AE) / S (Shutter Speed Priority AE) / M (Manual Exposure) | |
| Exposure compensation | -5.0EV~+5.0EV 1/3EV step (Movie: -2.0EV~+2.0EV) | |
| Shutter type | Focal Plane Shutter | |
| Shutter speed | Mechanical Shutter | P mode: 4sec. to 1/8000sec. A mode: 30sec. to 1/8000sec. S/M mode: 15min. to 1/8000sec. Bulb mode: up to 60min. |
| Electronic Shutter*3 | P mode: 4sec. to 1/32000sec. A mode: 30sec. to 1/32000sec. S/M mode: 15min. to 1/32000sec. Bulb mode: 1sec. Fixed | |
| Electronic front curtain shutter | P mode: 4sec. to 1/8000sec. A mode: 30sec. to 1/8000sec. S/M mode: 15min. to 1/8000sec. Bulb mode: up to 60min. | |
| Mechanical + Electronic shutter |
P mode: 4sec. to 1/32000sec. A mode: 30sec. to 1/32000sec. S/M mode: 15min. to 1/32000sec. Bulb mode: up to 60min. | |
| E-front + Mechanical shutter | P mode: 4sec. to 1/8000sec. A mode: 30sec. to 1/8000sec. S/M mode: 15min. to 1/8000sec. Bulb mode: up to 60min. *Electronic front curtain shutter works until 1/2000sec. |
|
| E-front + Mechanical + Electronic shutter |
P mode: 4sec. to 1/32000sec. A mode: 30sec. to 1/32000sec. S/M mode: 15min. to 1/32000sec. Bulb mode: up to 60min. *Electronic front curtain shutter works until 1/2000sec, Mechanical shutter works until 1/8000sec. |
|
| Synchronized shutter speed for flash | 1/250sec. or slower | |
| Continuous shooting | Approx. 11fps (JPEG: 145 frames Lossless compression RAW: 42 frames Uncompressed RAW: 36 frames) | |
| Approx. 8.0fps (JPEG: 200 frames Lossless compression RAW: 46 frames Uncompressed RAW: 39 frames) | ||
| Approx. 5.7fps (JPEG: endless Lossless Compression RAW: 62 frames Uncompressed RAW: 43 frames) | ||
| Approx. 5.0fps (JPEG: endless Lossless compression RAW: 79 frames Uncompressed RAW: 46 frames) | ||
| Approx. 4.0fps (JPEG: endless Lossless compression RAW: 134 frames Uncompressed RAW: 53 frames) | ||
| Approx. 3.0fps (JPEG: endless Lossless Compression RAW: endless Uncompressed RAW: 71 frames) | ||
| Approx. 30fps [Only electronic shutter, 1.25 x Crop ] (JPEG： 60 frames Lossless compression RAW： 35 frames Uncompressed RAW： 33 frames) | ||
| Approx. 20fps [Only electronic shutter, 1.25 x Crop ] (JPEG： 114 frames Lossless compression RAW： 37 frames Uncompressed RAW： 34 frames) | ||
| Approx. 20fps [Only electronic shutter ] (JPEG: 79 frames Lossless compression RAW: 36 frames Uncompressed RAW: 34 frames) | ||
| Approx. 10fps [Only electronic shutter, 1.25 x Crop ] (JPEG： 500 frames Lossless compression RAW： 48 frames Uncompressed RAW： 39 frames) | ||
| Approx. 10fps [Only electronic shutter ] (JPEG: 164 frames Lossless compression RAW: 44 frames Uncompressed RAW: 37 frames) | ||
| *Recordable frames depends on recording media *Speed of continuous shooting depends on shooting environment and shooting frames |
||
| Auto bracketing | AE Bracketing (Frames: 2, 3, 5, 7, 9 Step: by 1/3EV step, up to ±3EV steps) | |
| Filmsimulation bracketing (Any 3 types of film simulation selectable) | ||
| Dynamic Range Bracketing (100%, 200%, 400%) | ||
| ISO sensitivity Bracketing (±1/3EV, ±2/3EV, ±1EV) | ||
| White Balance Bracketing (±1, ±2, ±3) | ||
| Focus Bracketing (AUTO, MANUAL) | ||
| Focus | Mode | Single AF / Continuous AF / MF |
| Type | Intelligent Hybrid AF (TTL contrast AF / TTL phase detection AF) |
|
| Low-light Performance | Contrast: -3.0EV Phase Detection: -6.0EV (XF35mmF1.4 attached) | |
| AF frame selection |
Single point AF: EVF / LCD: 13×9 / 25×17 (Changeable size of AF frame) Zone AF: 3×3 / 5×5 / 7×7 from 91 areas on 13×9 grid Wide/Tracking AF: (up to 18 area) *AF-S: Wide / AF-C: Tracking All |
|
| White balance | Automatic Scene recognition / Custom1~3 / Color temperature selection (2500K~10000K) / Preset: Fine, Shade, Fluorescent light (Daylight), Fluorescent light (Warm White), Fluorescent light (Cool White), Incandescent light, Underwater |
|
| Self-timer | 10sec. / 2sec. | |
| Interval timer shooting | Yes (Setting: Interval, Number of shots, Starting time) | |
| Flash modes | MODE: TTL MODE (Flash Auto, Standard, Slow Sync.), Manual, Multi, OFF SYNC. MODE: 1st Curtain, 2nd Curtain, AUTO FP (high-speed sync) RED EYE REMOVAL: FLASH + REMOVAL, FLASH, REMOVAL, OFF |
|
| Hot shoe | Yes (Dedicated TTL Flash compatible) | |
| Viewfinder | OVF | Reverse Galilean viewfinder with electronic bright frame display Coverage of frame area v.s. capturing area: approx. 95% Magnifications approx x0.52 |
| EVF | 0.5 inch approx. 3.69 millions dots OLED Color Viewfinder (4:3) Coverage of viewing area vs. capturing area: approx. 100% Eyepoint: approx. 16.8mm (from the eyepiece lens) Diopter adjustment: -4~+2m-1 Magnification: 0.66× with 50mm lens (35mm equivalent) at infinity and diopter set to -1m-1 Diagonal angle of view: approx. 32° (Horizontal angle of view: approx. 27° ) Built-in eye sensor |
|
| LCD monitor | 3.0 inch, aspect ratio 3:2, approx. 180 degree tilting 1.62 millions dots touch screen color LCD monitor(approx. 100% coverage) | |
| Sub monitor | 1.28 inch, aspect ration 1:1, Color Memory LCD | |
| Movie recording | File format | Format: MOV, Compression: MPEG-4 AVC/H.264 Audio: Linear PCM / Stereo sound 2ch / 24bit / 48KHz sampling) |
| File size | ［DCI 4K(4096×2160)］ 29.97p/25p/24p/23.98p 200Mbps/100Mbps up to approx. 15min | |
| Frame rate | ［4K(3840×2160)］ 29.97p/25p/24p/23.98p 200Mbps/100Mbps up to approx. 15min | |
| Recording time | ［Full HD(2048 ×1080)］ 59.94p/50p/29.97p/25p/24p/23.98p 200Mbps/100Mbps/50Mbps up to approx. 59min. | |
| ［Full HD(1920×1080)］ 59.94p/50p/29.97p/25p/24p/23.98p 200Mbps/100Mbps/50Mbps up to approx. 59min. | ||
| ［Full HD(1920×1080) High speed rec.] 120p / 100p 200Mbps(recording) up to approx. 6min. | ||
| *For recording movies, use a SD memory card with UHS Speed Class 3 or higher. *Although movie recording will continue without interruption when the file size reaches 4GB, subsequent |
||
| footage will be recorded to a separate file which must be viewed separately. | ||
| Film simulation mode | 17 modes (PROVIA/Standard, Velvia/Vivid, ASTIA/Soft, Classic Chrome, PRO Neg.Hi, PRO Neg.Std, Black & White, Black & White+Ye Filter, Black & White+R Filter, Black & White+G Filter, Sepia, ACROS, ACROS+Ye Filter, ACROS+R Filter, ACROS+G Filter, ETERNA/Cinema, Classic Neg) Monochromatic Color |
|
| Clarity setting | ±5 steps | |
| HDR mode | AUTO, 200%, 400%, 800%, PLUS | |
| Grain effect | Roughness: STRONG, WEAK, OFF Size: LARGE, SMALL | |
| Color chrome effect | STRONG, WEAK, OFF | |
| Color chrome Blue | STRONG, WEAK, OFF | |
| Dynamic range setting | Still | AUTO, 100%, 200%, 400% ISO restriction (DR100%: No limit, DR200%: ISO320 or more, DR400%: ISO640 or more) |
| Movie | 100%, 200%, 400% ISO restriction (DR100%: No limit, DR200%: ISO320 or more, DR400%: ISO640 or more) |
|
| Advanced filter | Toy camera, Miniature, Pop color, High-key, Low-key, Dynamic tone, Soft focus, Partial color (Red / Orange / Yellow / Green / Blue / Purple) |
|
| Wireless transmitter |
Standard | IEEE802.11b/g/n (standard wireless protocol) |
| Encryption | WEP / WPA / WPA2 mixed mode | |
| Access mode | Infrastructure | |
| Bluetooth | Standard | Bluetooth Ver 4.2 (Bluetooth low energy) |
| Operating frequency (Center frequency) | 2402 – 2480MHz | |
| Terminal | Digital interface | USB Type-C (USB3.1 Gen1) |
| HDMI output | – | |
| Other | Microphone / shutter release input: ø2.5mm, Hot shoe | |
| Power supply | NP-W126S Li-ion battery (included) | |
| Battery life for still images*4 | Approx. 370 / 440 frames (EVF / OVF Normal Mode) When XF35mmF1.4 R is set. | |
| Actual battery life of movie capture*4 *Face detection is set to OFF |
[4K] approx. 45min. (29.97p) [Full HD] approx. 45min. (59.94p) |
|
| Continuance battery life of movie capture*4 *Face detection is set to OFF |
[4K] approx. 60min. (29.97p) [Full HD] approx. 75min. (59.94p) |
|
| Dimensions | (W) 140.5mm × (H) 82.8mm × (D) 46.1mm / (W) 5.5in × (H) 3.3in × (D) 1.8in (minimum depth 34.8mm/1.4in) | |
| Weight | Approx. 497g / 17.5oz (including battery and SD memory card) Approx. 447g / 15.8oz (excluding battery and SD memory card) |
|
| Operation Environment |
Operating Temperature | ‘-10°C~+40°C / 32°F~104°F |
| Operating Humidity | 10%~80% (no condensation) | |
| Starting up period | Approx. 0.4sec. | |
| Accessories included | Li-ion battery NP-W126S, Shoulder strap, Body cap, Strap clip, Protective cover, Clip attaching tool, Hot shoe cover, Wiping cloth, USB cable (type A to C) | |
*1 Please see the Fujifilm website to check SD memory card compatibility.
*2 Exif 2.3 is a digital camera file format that contains a variety of shooting information for optimal printing.
*3 The Electronic Shutter may not be suitable for fast-moving objects. Flash cannot be used.
*4 Approximate number of frames or movie recording time that can be taken with a fully-charged based on CIPA Standard.
The following video presents The new X-Pro3 | Fujifilm:
“The newcomer to our X-Pro range has been designed to minimise distractions, keeping you focused on the craft of photography. The mirrorless camera features a durable yet elegant DuratectTM coating and titanium exterior, an advanced hybrid viewfinder with enhanced resolution to enhance the joy of viewfinder shooting, and a beautiful new ‘CLASSIC Neg’ Film Simulation.“
PRESS RELEASE in French:
COMMUNIQUÉ DE PRESSE
FUJIFILM LANCE LE NOUVEAU X-PRO3, MARQUANT UN RETOUR À L’ART (ET À L’ÂME) DE LA PHOTOGRAPHIE
Mississauga, Ontario, le 23 octobre 2019 – FUJIFILM North America Corporation est heureuse d’annoncer le lancement du FUJIFILM X-Pro3, le tout dernier boîtier de style télémètre à intégrer la gamme d’appareils numériques sans miroir Série X. Cet appareil est l’outil parfait pour les photographes occupés désirant durabilité, fiabilité et fonctionnalité à la fine pointe de la technologie, au sein d’un boîtier discret.
Créé spécifiquement pour les photographes de rue et les photojournalistes, le X-Pro3 intègre des fonctions qui permettent de demeurer concentré sur le sujet. Son capteur optique / électronique (OVF / EVF) hybride révolutionnaire et son écran ACL tactile dissimulé permettent à l’usager de rester dans le moment, tandis que son capteur image à la fine pointe de la technologie et ses capacités vidéo 4K évoluées assurent des résultats spectaculaires à tout coup. Le X-Pro3 est l’outil photographique par excellence, combinant les qualités des appareils à film à la convivialité ainsi qu’à la finesse des appareils numériques.
Le X-Pro3 présente l’un des boîtiers les plus durables de toute l’histoire FUJIFILM. Son extérieur est fait de titane, une matière reconnue pour son rapport résistance-poids très élevé. Deux couleurs seront offertes, certaines présentant la technologie de durcissement en surface DuratectMC*1 (Dura), qui assure une robustesse accrue et un fini optimal. Le X-Pro3 est doté du capteur X-Trans CMOS 4 rétroéclairé à 26,1 MP ainsi que du processeur d’image X-Processor 4 qui ont tout d’abord été intégrés aux modèles FUJIFILM X-T3 et X-T30. Grâce à ces dispositifs et à nos nouvelles mises à niveau, le système de mise au point automatique (AF) à détection de phase fonctionne maintenant à une luminance minimale de -6 EV – une obscurité presque totale. L’appareil intègre également le nouveau mode de simulation de film «CLASSIQUE Nég.», conçu pour simuler les films négatifs couleur qui étaient normalement utilisés pour les clichés de tous les jours.
Autres renseignements sur le X-Pro3 :
Nouvelle combinaison OVF / EVF : Pour produire des photos de qualité optimale, il faut pouvoir s’arrêter à l’instant opportun sur des moments naturels. Le viseur hybride impressionnant du X-Pro3 vous permet de toujours rester pleinement immergé dans le moment, sans l’influencer. Le viseur optique (OVF) applique un grossissement de 0,5x et des lignes de cadrage à correction de parallaxe pour offrir une vue ininterrompue et naturelle de ce qu’il y a devant vous. Il vous permet aussi de voir à l’extérieur de l’image cadrée, pour être prêt à saisir toute action imminente. De plus, cet appareil intègre un viseur électronique (EVF) organique à DEL d’une résolution de 3,69 millions de pixels qui reproduit rapidement et avec grande précision votre image, exactement telle qu’elle sera saisie, selon un rapport de contraste de 1:5000 pour une excellente clarté. Ces deux capteurs combinés vous aideront à créer des images spectaculaires et à reproduire votre monde exactement tel que vous le voyez.
Écran ACL tactile dissimulé, orientable sur 180 degrés : Chaque facette du X-Pro3 a été minutieusement étudiée pour permettre au photographe de rester plongé dans le moment. Son écran ACL tactile dissimulé, orientable sur 180 degrés et présentant une résolution de 1,62 million de pixels, en est la meilleure preuve. Lorsque l’écran ACL est fermé, seul un mini-écran affichant les réglages essentiels est visible, ce qui élimine les distractions durant la pose. Étant donné que votre esprit et votre œil demeurent tournés vers la scène devant vous plutôt que d’être sur le moment que vous venez de photographier, vous restez constamment connecté non seulement avec votre sujet, mais aussi avec votre art. Si la recherche du moment parfait est vitale pour vous, le X- Pro3 est absolument l’appareil à utiliser.
Capteur, processeur et système AF offrant une performance incroyable : Au cœur du X-Pro3 se trouve une combinaison à la fine pointe de la technologie : le capteur X- Trans CMOS 4 et le moteur X-Processor 4. Le capteur exceptionnel à 26,1 mégapixels est rétroéclairé pour maximiser la qualité et la plage dynamique, tandis qu’un réseau de filtres colorés unique contrôle les effets moirés et les fausses couleurs sans qu’il soit nécessaire d’utiliser un filtre optique passe-bas. Ce système d’imagerie remarquable est complété par X-Processor 4, un moteur puissant à quatre unités centrales qui non seulement procède au traitement rapide et uniforme des images, mais aussi, grâce au nouvel algorithme de Fujifilm, optimise la performance du système de mise au point automatique, permettant une détection des visages et des yeux précise, jusqu’à un minimum de -6 EV.
Construction du boîtier optimisée : Le boîtier classique du X-Pro3 présente dans le haut et le bas une plaque en titane; ce matériau, dont la densité est un peu plus de la moitié de celle de l’acier inoxydable, est cependant sept fois plus durable. En plus du modèle noir classique, le X-Pro3 scellé contre les intempéries sera offert en «Dura argent» et en «Dura noir» (Dura signifiant qu’une technologie par plasma froid a été appliquée pour former un fini résistant aux égratignures). Une durabilité exceptionnelle a été combinée à une unité d’obturation de nouvelle conception pour vous offrir fiabilité, précision, sensibilité et fonctionnalité au sein d’un appareil pouvant performer dans pratiquement toute situation.
Reproduction chromatique spectaculaire et modes de simulation de film
inégalés : Cet appareil fait appel au patrimoine légendaire de Fujifilm dans le domaine des sciences chromatiques pour produire des images d’une qualité phénoménale qui épateront même les photographes les plus pointilleux. Depuis ses débuts dans l’industrie il y a 85 ans, Fujifilm a créé des pellicules photographiques qui font maintenant partie des plus réputées au monde. Nos seize modes de simulation de film intègrent tout le savoir-faire et toute l’expertise de Fujifilm, permettant aux photographes d’obtenir des résultats saisissants directement de l’appareil. Et bonne nouvelle, le X- Pro3 inclut deux tout nouveaux modes de simulation dynamiques : CLASSIQUE Nég. et MONOCHROMATIQUE Couleur!
Le tout premier appareil pour objectifs interchangeables de la Série X a été le FUJIFILM X-Pro1, lancé sur le marché en février 2012. Son successeur, le FUJIFILM X-Pro2, a été lancé en mars 2016 et intégrait de nettes améliorations sur le plan de la qualité d’image et de la performance. La série X-Pro est prisée par de nombreux photographes professionnels et amateurs, et est idéale si vous cherchez un appareil classique de style télémètre, une bonne portabilité et une opération intuitive par cadrans. Le X-Pro3 poursuit la tradition de cette série et est la solution suprême pour tout photographe occupé qui sait combien il est important de s’immerger dans le moment.
Le X-Pro3 sera offert au Canada et aux États-Unis aux prix au détail suggérés suivants :
Noir : 2399,99 $CA / 1799,95 $US
Dura noir / Dura argent : 2699,99 $CA / 1999,95 $US
Le X-Pro3 devrait être lancé sur le marché à la fin de l’automne 2019. Pour plus de renseignements, visitez https://fujifilm-x.com/en-us/x-pro3.
*1 Duratect est une marque de commerce ou une marque déposée de Citizen Watch Co., Ltd.
Au sujet de FUJIFILM North America Corporation, division de l’imagerie électronique produits et services Fujifilm au Canada.
Pour plus de renseignements, visitez www.fujifilmusa.com/northamerica, https://twitter.com/FujifilmX_US pour suivre nos progrès sur Twitter, https://www.instagram.com/fujifilmx_us/ pour nous suivre sur Instagram ou https://www.facebook.com/FujifilmXUS/ pour voir notre page Facebook. Pour recevoir directement nouvelles et information via RSS, inscrivez-vous à www.fujifilmusa.com/rss.
Au sujet de FUJIFILM
FUJIFILM North America Corporation, subsidiaire de marketing de FUJIFILM Holdings America Corporation, est formée d’une entreprise filiale ainsi que de cinq divisions d’exploitation. Notre division de l’imagerie offre des produits et des services photographiques grand public et commerciaux, y compris papiers photographiques, matériel, services et support pour l’impression numérique, produits photo personnalisés, films et appareils photo à usage unique; cette division commercialise également des pellicules d’archivage à l’intention de l’industrie du cinéma, en plus de diverses solutions de gestion de la couleur pour les industries du cinéma, de la diffusion et de la production. Notre division de l’imagerie électronique, quant à elle, procède à la commercialisation des appareils photo numériques grand public. Notre division des systèmes graphiques procure divers produits et services à l’industrie de l’impression graphique. Notre division des dispositifs optiques produit des lentilles d’optique pour les marchés de la diffusion, de la cinématographie, de la télévision en circuit fermé, de la vidéographie et d’autres marchés industriels, en plus de commercialiser d’autres produits tels que des jumelles. Enfin, notre division du développement des nouvelles affaires industrielles et corporatives crée de nouveaux produits qui sont dérivés des technologies Fujifilm. FUJIFILM Canada Inc. vend et commercialise bon nombre des produits et services Fujifilm au Canada. Pour plus de détails, visitez www.fujifilmusa.com/northamerica, www.twitter.com/fujifilmus pour suivre nos progrès sur Twitter ou notre page Facebook à www.facebook.com/FujifilmNorthAmerica. Pour recevoir directement nouvelles et information via RSS, inscrivez-vous à www.fujifilmusa.com/rss.
FUJIFILM Holdings Corporation, de Tokyo au Japon, met à profit ses vastes connaissances ainsi que ses technologies fondamentales pour offrir des solutions novatrices à une gamme étendue d’industries mondiales. Ses technologies exclusives contribuent à l’évolution d’une vaste gamme de secteurs, y compris soins de santé, systèmes graphiques, produits à haute fonctionnalité, produits optiques, imagerie numérique et documents. Notre portefeuille inclut d’innombrables produits et services intégrant diverses technologies chimiques, mécaniques, optiques, électroniques et d’imagerie. Pour l’exercice financier s’étant terminé le 31 mars 2019, notre société affichait des revenus globaux de 22 milliards de dollars, selon un taux de change de 111 yens pour 1 dollar US. FUJIFILM fait preuve d’un engagement soutenu envers une gérance environnementale et une présence sociale responsables. Pour plus de détails, visitez www.fujifilmholdings.com.
FUJIFILM et X-TRANS sont des marques de commerce de FUJIFILM Corporation et de ses affiliés.
© FUJIFILM North America Corporation et affiliés, 2019. Tous droits réservés.